VOLTCRAFT SEM6000 Bedienungsanleitung Seite 22

• Do not operate the device in environments where
• The device can warm up during use. Make sure not
• Do not use this product in hospitals or medical
c) Handling and use
• Never plug in, unplug or operate the product when
• Never connect the product to the power supply
22
there are high levels of dust, flammable gases,
vapours or solvents. There is a danger of fire and
explosion!
to place it on sensitive surfaces.
institutions. Radiowaves may interfere with medical
equipment. The same may also apply to other
areas.
your hands are damp or wet. There is a risk of a life-
threatening electric shock! The same applies for the
load that is plugged into the socket of the product.
immediately after it has been transferred from a
cold room into a warm one (e.g. during transport).
The condensation that forms might destroy the
device. Moreover, there is danger of electric shock!
Allow the product to reach room temperature. Wait
until the condensation has evaporated. This might
take several hours. Only then the product may be
plugged into the mains socket and put into use.