hanseatic HGS14355DI Gebrauchsanleitung Seite 56

Page EN-24 First use
7. Screw the right screw foot (4) back in.
(24)
8. Loosen the screw (24) and re-insert it on
the opposite side.
Prepare the appliance door and
lower hinge
(3)
1. Reposition the door handle (3) if neces-
sary. Read the section "Attaching the door
handle" again at page EN-22.
(25)
(4)
2. Loosen the screw on the plastic insert (25)
of the appliance door and remove the
plastic insert.
3. Screw the plastic insert (26) on the oppo-
site side of the appliance door (2).
4. Using the 10 mm spanner and pliers,
loosen the nut (27) for the hinge pin (28)
on the lower hinge (23) and remove it to-
gether with the snap ring (29).
(28)
5. Turn the lower hinge over and screw the
hinge pin and snap ring back on.
(26)
(28)
(29)
(27)
(23)
(29)
(27)
(23)