ND tackle BAIT BOAT 2 Benutzerhandbuch Seite 9

Using the Smart Remote Control
How to use the autopilot with the remote control
1. Define the 'Home point' on the water in the close range of your fishing spot.
This is the point to which your boat will return.
Press and hold the 'CH' button for a long time,
the LED for Home will light up.
2. Drive to a point to be marked as a spot.
3. Press the 'CH' button, the LED for Spot A will flash.
Each time you press 'CH', you will cycle through spots A, B, C, D.
4. If you want to define a spot that flashes, press the 'EN' key to confirm.
The LED on the remote control will now light up permanently. The spot is defined.
5. Test the autopilot and press 'H' to navigate home or A to navigate to spot A.
Additional purchase AUTOPILOT from APP
13
page
How to open the hopper doors
and hook release via handset
The boat has two hoppers that can be released independently.
Release Hopper-H1: Long press on the 'H1' button.
Release Hopper-H2: Long press on the 'H2' button.
Release hook: Long press on the 'Home' button.
14
page