ND tackle BAIT BOAT 2 Benutzerhandbuch Seite 15

How to open the hopper doors and
release the hook via APP
1. Click on the crosshair symbol.
1
2. A view opens with the 'Hopper 1' , 'Hopper 2' and 'Hook' buttons.
3. Press the desired action.
25
page
How to register the smart
remote control with the boat
If the remote control cannot control the boat, please register it again.
1. Switch on the remote control.
2. Press and hold the analog stick until the GPS LED flashes quickly.
3. Hold the remote control near the boat's antenna.
4. Switch on the bait boat.
5. New radio codes are now exchanged between the remote control and the boat and the
registration is completed with an acoustic signal.
6. If this did not work and you cannot control the boat, please repeat steps A-E.
26
page