ND tackle BAIT BOAT 2 Benutzerhandbuch Seite 7

Charging and
5
maintaining the battery
1. Charging the boat battery
Charger parameters:
GREEN: Full
RED: Charging
Output: 16.8V/2A
Never charge the battery without supervision and keep a distance of one metre from flammable
materials. Also read the general instructions on battery safety and charging safety.
To ensure trouble-free and safe charging, use only the chargers supplied by ND Tackle. Make sure the
power switch on the boat is turned off and remove the battery. Use the supplied adapter to connect the
battery to the charger. Then plug the charger into the power outlet. The charging process will start.
If you want to charge two batteries together with the Y-adapter, the batteries should already have been
connected to the adapter for at least one hour. Batteries of the same type may only be connected if they
have the same voltage or the voltage does not differ by more than 0.5 V from each other. The voltage is
directly related to the state of charge. You can check the voltage of a battery in the app. The voltage is
displayed there in volts.
If the boat is not used for a long period, charge the batteries every 6 months.
2. Charging the battery of the remote controller
Use a commercially available
smartphone charger with a USB port.
Use the supplied USB cable for
charging. The RL LED flashes during
charging. When the remote control is
fully charged, the RL LED lights up
continuously.
9
page
LED
BL RL
A B
C D
HOME GPS
How to
6
order the autopilot
Note: The boat also works without the autopilot and you can use the app and see the position of
the boat in real time on the map. Purchasing the autopilot adds the following features:
1. Automatic driving to spots. The boat drives automatically to a set spot.
2. Return to Home' function: The boat returns to the home point. It also returns in the event of an error,
for example if it loses the radio connection.
3. Mapping function. A sonar that supports the creation of bathymetric maps is required.
Order the Autopilot via the app
1. Open the app menu, click on 'Order Autopilot'.
2. Follow the instructions on screen.
1
2
4
3
5
10
page