Description Of The Device; Product Features - EuroLite SB-1100B Bedienungsanleitung

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
The ambient contamination must never exceed level 1 and must not be conducting, only dry.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Inspection deadlines according to DGUV-V3 for electrical resources must be complied with.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
WEEE Directive
When to be definitively put out of operation, take the unit(s) to a local recycling plant for a disposal which
is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or local
authorities for more information.

4. DESCRIPTION OF THE DEVICE

4.1 Product features

Practical 32A distributor in 19" housing
Specially designed for larger distribution needs
•
3U necessary for installation
•
32A three phase current input via power cable and plug
•
32A three-phase current output via mounted plug, secured on the back panel by a fault current circuit
•
breaker
The entire distributor is secured via a Type B 40A/0.03A 4-pol fault current circuit breaker
•
2 mounted CEE sockets with 16A on the front panel are secured via 2 x 16A fuse blocks
•
Control lamps indicate each phase
•
6 safety sockets on the housing back (2 per phase)
•
Each pair of safety sockets feature fuse protection via 16A automatic circuit breakers
•
With earthing screw in order to ground a rig if necessary
•
12/16 00139830.DOC, Version 1.0