Axis P3364-LVE Installationshandbuch Seite 22

AXIS P3364-LVE Network Camera
1
Locking screw
2 Lens holder
3
Marking (design A)
4
Marking (design B)
2. Loosen the locking screw.
3. Check the Live View page and turn the lens holder to rotate the lens 90° or 180°.
4. Once satisfied, gently tighten the locking screw to secure the lens holder's position.
Tilt the Lens
1. Open the Live View page, see Access the Product on page 25.
2. Loosen the two screws.
3. Check the Live View page and tilt the lens to the desired position.
4. Tighten the two screws.
1
2
22
3
4