Optional Accessory; Optional Accessories - Makita DVC750LTX1 Betriebsanleitung

4. To install the HEPA filter/wet filter, place and twist
it clockwise so that the securing lips are firmly locked in
the tank cover.
► Fig.20: 1. Tank cover 2. HEPA filter 3. Securing lip
4. Tank
5. Mount the tank cover and lock it.
NOTE: The filter wear out in course of time. It is rec-
ommended to have some spares for them.
Installing prefilter set

Optional accessory

NOTE: Use the prefilter set only when picking up dry
dust with HEPA filter. If you use the prefilter set for
picking up water, the water suction capacity may be
reduced.
The prefilter set, consisting of the prefilter and dumper,
reduces dust clogging in the HEPA filter to keep the
suction power.
1. Unlock and remove the tank cover.
2. Set the damper on the HEPA filter and cover it
with the prefilter. Be sure to hook the rubber band of the
prefilter onto the lip of the HEPA filter.
► Fig.21: 1. HEPA filter 2. Damper 3. Prefilter
3. Mount the tank cover and lock it.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hose
• Front cuff 24
• Joint 22-38
• Corner nozzle
• Round brush
• Shoulder strap
• Wet filter
• HEPA filter
• Prefilter set
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
13 ENGLISH