Philips SJM3151/10 Bedienungsanleitung Seite 11

4. Select the device and brand of the device
you want to add by using the cursor keys.
Press . The remote will search the
OK
database for available code sets.
5. Follow the on-screen instructions to test
the codes. When a working code set is
found, your device is correctly installed.
When the device is correctly installed, the
following screen appears:
If no working code set is found:
• You can perform a full data base search to
find a correct code set. This can take up to
25 minutes.
• You can learn codes from the original
remote device.
To add an additional device:
1. Select "Yes", Press
2. Repeat this process for each
additional device.
3. When you are finished adding devices,
select "No". Press
Getting Started
SJM315Final.indb 11
All manuals and user guides at all-guides.com
.
OK
. Exit the wizard.
OK
D
Note
You can adjust the settings of your universal
remote for iPod™ anytime after initial install
via the set-up menu. Press the
keys simultaneously for 3 seconds.
LAUNCH
The screen will ask you to press and hold the 2
keys for 3 seconds to enter set-up mode.
and
MODE IPOD™
11
8/14/07 4:10:28 PM