Searching For Digital Channels From The Cable Provider Automatically - Beko B40K 590G Kurzanleitung

SETTING FURTHER CHANNELS
Searching for digital channels
from the cable provider auto-
matically
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Source« with »
<
» « and press »
– »Source« menu is active.
4 Select the line »Automatic Channel Search«
with » « or »
V
confirm.
5 Select the option »Cable (DVB-C)« with
» « or » « and press »OK« to confirm.
V Λ
– »Automatic Channel Search« menu is
displayed.
Settings > Source > Automatic Channel Search
Picture Sound
Scan Type
Frequency
Network ID
Continue
6 Select the line »Scan Type« with »
» « and select the option »Quick« or »Full«
V
scan type with »
– »Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
Network ID« performs the installation that
is suitable to your network. If you know
the Network ID, please enter it. If you do
not know the Network ID, please select
»Auto« for »Frequency« and »Network
ID«.
– If scanning cannot be performed with
»Quick« option, select »Full«. All current
channels are tuned and stored in »Full«
scanning. This scanning process can take
a long time. This option is recommended
if your cable operator does not support
quick scanning function.
64 / 78 EN
«, »
V
« to confirm.
V
« and press »OK« to
Λ
Tuesday
xx xxx xxxx
Source TV Timer Parental
Quick
AUTO
AUTO
Back
BACK
« or
Λ
< >
« or » «.
-----------------------------------------------------
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet
forums.
«,
Λ
7 Confirm the »Continue« with »
>
« or
Note:
Select whether to search for digital or
7
analogue TV channels. To do this press
» « or »
V
or »Analog« and press »OK« to remove or
apply the "small tick".
8 Press » « (red) to start searching.
Notes:
When updating via the same satellites a
7
security query is displayed at the start of a
search.
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
Exit
EXIT
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
9 Switch to the Channel Editor with »
(yellow) ;
or
press »EXIT« to end the setting.
« to select the option »Digital«
Λ
Television / User Manual
« (blue).
«