Herunterladen Inhalt Inhalt Diese Seite drucken

Blocking The Multifunction Switch; Changing The Pin Code; Blocking A Television Channel - Beko B40K 590G Kurzanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

PARENTAL SETTINGS
Blocking the multifunction
switch
When the key lock is activated, the multi function
switch on the television does not function.
1 From the »Parental« menu use »
to select the line »Keypad Lock« and press
<
>
»
« or »
« to confirm.
2 Enter the PIN code »1234« with »1...0« in
the password prompt.
3 Activate (On) or deactivate (Off) the panel
<
>
lock with »
« or »
4 Press »BACK
« to go back one menu
<
level or press »EXIT« to end the setting.

Changing the PIN code

Instead of the default code »1234«, you can
enter a personal code.
Please take note of your personal code.
1 From the »Parental« menu use »
to select the line »Change PIN« and press
»OK« to confirm.
2 Enter the current PIN code »1234« with
»1...0«.
3 Enter your new four-digit personal PIN code
with »1...0«.
4 Reenter your personal PIN code with
»1...0«.
5 Press »BACK
« to go back one menu
<
level or press »EXIT« to end the setting.
Television / User Manual
---------------------------------------------------------------------------------
« or »
«
V
Λ
«.
« or »
«
V
Λ

Blocking a television channel

You can block individual television channels
which are not suitable for children using a
personal PIN code.
1 Open menu with »MENU« button.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select the menu item »Source« with »
<
»
« and press »OK« to confirm.
4 Select the line »Channel Editor« with »
or »
« and press »OK« to confirm.
Λ
5 Select the channel to be blocked with »
<
>
»
«, »
« or »
« and highlight with »OK«.
Λ
–Channel is marked with »✔«.
6 Activade the »Tools« menu with »
low).
7 Select the line »Channel Lock« with »
»
« and press »OK« to confirm.
Λ
8 Enter the PIN code »1234« with »1...0« in
the password prompt.
9 Confirm the entry with »OK«.
–Channel is marked with » «.
Note:
To remove the lock, select the channel
7
again with »
«, »
V
Λ
vade the »Tools« menu with »
select the line »Unlock Channel« with »
or »
« and press »OK« to confirm
Λ
10 Press »EXIT« to end the setting.
«, »
«,
V
Λ
>
« or
«
V
«,
V
« (yel-
« or
V
<
>
«, »
« or »
«, acti-
« (yellow),
«
V
47 / 78 EN

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis