Setting Further Channels; Searching For All Digital Channels From A Satellite Automatically - Beko B40K 590G Kurzanleitung

SETTING FURTHER CHANNELS

Searching for all digital channels
from a satellite automatically
New satellite channels are added or satellite
data is changed frequently. Therefore, we
recommend you to run auto search function from
time to time.
All transponders are scanned for new channels.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Source« with »
<
» « and press »
– »Source« menu is active.
Settings > Source
Picture Sound
Automatic Channel Search
Manual Channel Search
Channel Editor
Advanced
Change Area
4 Select the line »Automatic Channel Search«
with » « or »
V
confirm.
– Menu is displayed.
5 Select the option »Satellite (DVB-S/S2)«
with » « or »
V
confirm.
6 Confirm the push button »Continue« with
» « (blue).
7 Select the Channel Type.
Press » « or »
V
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
58 / 78 EN
«, »
V
« to confirm.
V
Tuesday
xx xxx xxxx
Source TV Timer Parental
Back
BACK
« and press »OK« to
Λ
« and press »OK« to
Λ
« to select whether you
Λ
-----------------------------------------------------
8 Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
V
and mark or unmark the »Free« and/or
»Scrambled« items.
9 Press » « (red) to start searching.
«,
Notes:
Λ
When updating via the same satellites a
7
>
security query is displayed at the start of a
« or
search.
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Exit
EXIT
Note:
The search can be aborted with »EXIT«.
7
10 Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
« or » « and press OK« to select
Λ
Television / User Manual
«