Meec tools 016372 Bedienungsanleitung Seite 32

EN
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
Handy and portable battery powered
compressor. Perfect for pumping tyres
(4 Ah battery recommended for this) and
for other small compressed air jobs.
The compressor has rubber feet that effectively
reduce vibrations, a practical foam coated
carry handle, safety valve and quick-release
coupling for easy handling/switching between
different tools. Battery, charger, air hose and
other accessories sold separately in Jula's
department stores and at www.jula.com.
1. Pressure gauge, air tank
2. Dial, pressure regulator
3. Drain valve
4. Pressure gauge, regulator
5. Quick-coupling
6. Carry handle
7. Safety valve
8. Power switch
FIG. 1
32
USE
WARNING!
Never exceed the nominal pressure for the
product, as specified by the manufacturer. If the
product is used for inflation, always follow the
instructions for maximum inflation pressure
from the manufacturer of the inflatable product.
NOTE:
Only use hoses, connections, accessories,
and tools etc. adapted for the product.
The product is intended for running small and
medium sized compressed air tools such as
air nozzles, air guns, tyre nozzles etc.
INSERTING/REMOVING
THE BATTERY
For more detailed charging instructions, see
the instructions for the battery and charger.
FIG. 2
1. Check that the product is switched off
(power switch in OFF position).
2. Fit a fully charged battery as shown (A).
NOTE:
Use battery with capacity of 4.0 Ah for best
functionality.
3. Check that the battery is locked in place
before use.
4. Press the lock (B) to remove the battery
from the product.
CONNECTING/DISCONNECTING
AIR HOSE
1. Check that the product is switched off and
that the battery is disconnected.
2. Turn the pressure regulator dial (2) all
the way anticlockwise, so that the output
pressure is set to 0 bar.
FIG. 3