Product Information; Safety Instructions - HAWA Concepta 25 Planungs- Und Montageanleitung

Hawa Concepta 25/30

2 Product information

Intended use
Pivot/slide-in hardware for wooden pocket doors for cabinet or wall recesses.
Intended place of use
Dry areas and interior areas where condensation may occur, e.g. in kitchens or bathrooms, but without any significant
chloride contamination.
Technical Data
Hawa Concepta 25
Maximum door weight
Door width
Door height
Door thickness
Sets can be used on the left and right.
Use the straightening fitting for stabilizing sliding doors.
For maximum door size / weight ratios, see table on page 21.
Maximum permissible deflection of the hardware assembly face and door ± 2 mm ( ").
LGA certificates are available for downloading at www.hawa.ch
Quick and reliable planning with the online calculation tool: www.concepta.hawa.com
Article number
Articles are identified by a 5-digit number.
General notes
The document «Safety Notes» (22991) is an integral part of these planning and assembly instructions.
The operating instructions, the planning and assembly instructions and the document «Safety notes» (22991) must be handed over
to the end user.
Metric measurements apply - those in inches are for information only.
Retain the instructions. Replacements available from www.hawa.ch.
Risk and residual risk
When using Hawa Concepta 25/30 to conceal electrical appliances please pay attention to the safety notes issued by the
manufacturer (heat accumulation). If necessary, use an automatic shutoff device (e.g. Safety Box, www.halemeier.de).
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.

3 Safety instructions

CAUTION
Moving parts can crush fingers.
– Do not touch moving parts!
25 kg (55 lbs.)
300 – 750 mm (11 "– 2'5 ")
13
---- -
16
1250 – 1850 mm (4'1 "– 6'0 ") Door height
7
---- -
32
19 – 50 mm ( "– 1 ")
3
31
- - ---- -
4
32
Hawa Concepta 30
Maximum door weight
Door width
17
---- -
32
27
---- -
32
Door thickness
30 kg
(66 lbs)
300 – 900 mm
(11 "– 2'11 ")
13
---- -
16
1851 – 2300 mm (6'0 "–7'6 ")
7
- -
8
19 – 50 mm
( "– 1 ")
3
- -
4
3
---- -
32
7
---- -
16
9
---- -
16
31
---- -
32
7/64