HAWA Concepta 25 Planungs- Und Montageanleitung Seite 6

HAWA Concepta 25/30
1 Table of contents
Contents
2 Product information
3 Safety instructions
4 Abbreviations, symbols
5 Overviews
6 Planning
7 Calculation
8 Pre-assembly
9 Assembly
10 Disassembling
6/64
5.1 Overview: Left-hand system
5.2 Overview: Connector 55 (optional)
5.3 Overview: Connector 110 with and without base (optional)
5.4 Overview: Two inset pivot sliding doors (optional)
5.5 Overview: Position numbers
6.1 Planning: Inset doors
6.2 Planning: Guide for two inset pivot sliding doors
6.3 Planning: Doors closing against base and top section with Connector 55
6.4 Planning: Doors closing against base and top section with Connector 110
6.5 Planning: Doors in wall recess
7.1 Calculation: Door weight/height ratio
7.2 Calculation: Plan view dimensions
7.3 Calculation: Hardware depth
7.4 Calculation: Drill hole positions HAWA Concepta 25
7.5 Calculation: Drill hole positions HAWA Concepta 30
8.1 Pre-assembly: Processing the left hand side profiles
8.2 Pre-assembly: Processing the right hand side profiles
8.3 Pre-assembly: Doors
8.4 Pre-assembly: Cabinet side
8.5 Pre-assembly: Outside pocket wall
8.6 Pre-assembly: Dampener
8.7 Pre-assembly: Upright
8.8 Pre-assembly: Aligning the cabinet
9.1 Assembly: Scissor and upright installation, left-hand system
9.2 Assembly: Scissor and upright, right-hand system
9.3 Assembly: Door
9.4 Assembly: Door closing system
9.5 Assembly: Fine adjustment of upright inclination for door thickness between 19 - 30 mm
9.6 Assembly: Fine adjustment of upright inclination for door thickness between 31 - 50 mm
9.7 Assembly: Positioning the top stop dampener
9.8 Assembly: Positioning the bottom stop dampener
9.9 Assembly: Door height adjustment
9.10 Assembly: Door clearance gap fine adjustment
9.11 Assembly: Front depth fine adjustment
9.12 Assembly: Fine adjustment of doors
9.13 Assembly: Fine adjustment pull-in speed
10.1 Disassembly: Door closing system for fixed outside panel
Page
7
7
12
14
15
16
17
18
19
20
21
22
23
24
26
28
29
30
31
32
33
34
36
37
38
39
40
43
46
47
50
52
53
54
55
56
57
58
59
60