Start; Temperature Control - Veripart VPKK170Z Bedienungsanleitung

START

Testing
1. Clean the parts of the refrigerator with lukewarm water containing a
little neutral detergent and wipe them dry.
Note!
• Electrical components should only be wiped with a dry cloth.
2. Turn the thermostat knob to the right position according to the scheme
below, then plug the refrigerator into the wall outlet. The compressor
and the light inside the refrigerator will begin to work.
3. Open the door 30 minutes later. If the temperature in the refrigerator
has dropped noticeably, the refrigeration system is working normally.
When the refrigerator has operated for a period of time, the
temperature controller will automatically set the temperature within
limits it adjusts.

Temperature Control

The temperature of the appliance can be adjusted by turning the
thermostat dial.
• The thermostat can be set between 1 and 7.
• 1 is the warmest setting.
• 7 is the coldest setting.
• The recommended setting is 4.
• Set the dial to 0 to turn off the cooling function.
The internal temperature of the appliance may vary based on ambient
temperature, the quantity of items stored and how frequently the door
is opened.
38