Surcharge Top Mounted Cabinet; Assembly Of The Attached Cabinet - Asecos V Serie Bedienungsanleitung

6. SURCHARGE TOP MOUNTED CABINET

head section rear
A
head section front
B
magnetic tape
C
fixation points for screw M6
D
•

6.1. ASSEMBLY OF THE ATTACHED CABINET

A C
C
D
B
The magnetic tape mounted on the headboard serves as a support surface for the top cabinet and can be cut
to size if required.
CAUTION:
The magnetic tape may only be attached to the rear head section!
ATTENTION:
The mechanical emergency release (see point 5.2.) is only possible after first dismantling the super-
structure.
340 mm
65 mm
1a
3
The cabinet is loadable if it was ordered with article HF.L.32864
(order no. 38275). The cabinet is then structurally adapted at the
factory and additionally marked on the outside as loadable.
CAUTION:
Only the fixation points [D] shown in the drawing
must be used!
Other fixation points or fixation types (e.g.
silicone) are not permitted!
C
The mechanical emergency release is only
possible to a limited extent, depending on the
wardrobe extension.
D
710 mm
65 mm
1b
= M6
4
a = Ø 7 mm
b = 340 / 710 mm
c = 65 mm
a
b
c
2
5
EN
25