In-Plant Transport; Erection • Commissioning • Function; Commissioning; Connection To The Power Supply - Asecos V Serie Bedienungsanleitung

EN
3. ERECTION • COMMISSIONING • FUNCTION
20
2.3. IN PLANT TRANSPORT
CAUTION:
The cabinet must not be moved by pulling the opened drawer! Pulling or sliding may only be carried out in
the body housing!
M10

3.1. COMMISSIONING

• Before putting into operation for the first time, the user must carry out an examination of the safety storage
cabinet for possible damage, such as defective or loose sealing elements, correct alignment and perfect func-
tioning of the door elements.
Use the cabinet and accessories only if they are in an orderly condition.

3.2. CONNECTION TO THE POWER SUPPLY

The power supply is provided by means of the enclosed power cable (10A, 250V, plug type 12 CH,
length 5 m).
CAUTION
The cabinet must be connected to the power supply at least 1 hour before storing items for the first time!

3.3. ALIGNMENT OF THE CABINETS

After disabling the automatic door closing (see 3.7) and opening the drawer, the cabinet can be aligned
using the integrated adjusting aids.
Steps for manoeuvring the cabinet:
• Open the drawer of the cabinet
• Connect the belts with steel angles or steel rings using a screw M10
• Screw the steel angles/rings into the threaded insert in the base of the
cabinet
• Move the cabinet carefully using the belts