1. NOTES • GUIDELINES • GUARANTEE
EN
18
1.1. GENERAL SAFETY NOTES
•
Observe applicable statutes and regulations, and the notes in these operating instructions, when handling
hazardous materials
•
Work on the electrical system is to be carried out only with the power turned o and only byqualified electri-
cians – refer here to the regulations of the local electricity supply company.
•
The on-site installation conditions are to be observed (e.g. bolting the cabinets to the building).
•
The instructions of the supervisory engineering department must be followed.
•
Observe accident prevention regulations and workplace ordinance
Ensure that the necessary safety checks are only carried out by authorised sta using original
•
spare parts
•
Only use the cabinet after having been properly instructed; access is to be forbidden to unauthorised persons.
•
The pivoting area of the doors is to be kept free at all times; doors/drawers are to be kept closed
•
By assigning trained/authorised technical personnel you can prevent the malfunctions, damage and corrosion
damage that result from inappropriate transport.
•
Observe the upper limits for stored quantities, loading etc.
•
Containers with a volume larger than that of the bottom collecting sump may not be placed inside the cabi-
net; spilt hazardous materials are to be collected immediately and removed
•
Vessels containing aggressive chemicals (acids/alkalis) are to be kept in special cabinets for acids and alkalis
or on shelves for acids and alkalis as well as in cabinets with metal-free interior equipmen.
•
Before storing such materials, check that the cabinet's surface is resistant to the chemicals.
•
Before the initial commissioning, the safety storage cabinet is to be examined by the user for possible dam-
age.
Set-up requirements
1.2. GUARANTEE
The guarantee for this product is agreed between you (the customer) and your dealer (the seller). As the
manufacturer, asecos guarantees the products listed in the operating instructions for a period of 24 months
from the date of delivery. All model safety equipment are subject to a compulsory annual inspection by spe-
cialised sta authorised by the manufacturer. Otherwise the customer's guarantee claim against the manufac-
turer expires.
1.3. CABINET DETAILS
Development: asecos GmbH Sicherheit und Umweltschutz, D-63584 Gründau.
Cabinet data: Logbook (included with the cabinet)
Technical drawing: see 13
Technical data: see 13
V-LINE
This model is tested, certified and marked according to requirements of DIN EN 14470-1. This is intended for
the storage of flammable liquids in work rooms in accordance with the valid national regulations.
0–35 °C
30–70 %