IKEA BEMOTA Serie Bedienungsanleitung Seite 14

ENGLISH
The hood is noisier than the
customer's expectations.
Button A flashes once per
second.
Button A flashes twice per
second.
Before contacting the Authorised Service
Centre:
Turn the power back on to check whether the
problem has disappeared. If this is not the
case, turn it off and repeat the operation after
one hour. If the appliance still does not work
correctly after carrying out the checks listed
The diameter of the air vent in the
wall is too small and causes the pres-
sure to drop and the motor speed to
increase.
The product is installed in recirculation
mode.
The ventilation duct has more than
one bend.
Grease filters alarm.
Activated carbon filters alarm.
Follow the installation instructions supplied with the appli-
ance.
The product in recirculation mode (and with the carbon
filter fitted) is noisier than a product in suction mode.
If the fume evacuation system of the building has mul-
tiple bends or covers a long distance, the product may
be noisier.
Clean the grease filter and reset the alarm. Consult the
care and maintenance guide and the control panel guide
to reset the filter alarm.
Clean the activated carbon filter and reset the alarm.
Consult the care and maintenance guide and the control
panel guide to reset the filter alarm.
in the troubleshooting guide and turning the
appliance back on, contact the Authorised
Service Centre clearly explaining the problem
and specifying:
• the type of fault;
• the model;
• the type and serial number of the appliance
(indicated on the data plate).
14