Atag CBR-AP Bedienungsanleitung Seite 20

- Press the BACK and OK
button simultaneously for 7
seconds. You will enter the
installers menu.
- Turn the select button to select
007 as technical code.
- Press the OK button.
- Turn the select button until
line of text Complete menu is
highlighted.
- Press the OK button.
- Go further to:
2 Boiler parameters ->
2.9 Other ->
2.9.2 Pump communication;
Choose 0 (=OFF) to
-
de-activate the pump
communication and confirm
your selection with OK.
- Press 4x on BACK to return to
the standard display
- The screen next shows air
purge;
The boiler is now ready to be
put in to operation.
15 Check if the boiler is working
properly;
16 Put the cover back on the
boiler;
17 Put back the 2 screws.
After working on the boiler
always put back the cover and
tighten with the 2 screws A and
B.
A
17
B
7 sec.