Atag CBR-AP Bedienungsanleitung Seite 16

GB
Instructions for replacing control unit from 2018 on
This instruction sheet describes the procedure for the replacement of the control unit of
- The CBR-AP boilers from 12-2018 (UK)
It is not allowed to change the boiler control panel and the MMI at the same time.
The boiler will lose all its boiler specific parameters and settings.
All work on the boiler has to be done by a competent person.
Boiler control unit/display
Content:
1. Boiler control PCB TW and Display
2. Fuses
3. Instructions
Necessary tools:
Philips screw driver
Note: Country-specific features may include deviations in the images that do not fully correspond with
reality.
Number:
1
2
1