Using The Appliance - Philips ICE PREMIUM HP6503 Bedienungsanleitung

using the appliance

general information about epilation
Epilation is easier just after a bath or shower. Make sure your skin
,
is completely dry when you start to epilate.
When you use the appliance for the first time, we advise you to try
,
it out on an area with only light hair growth. This helps you get
accustomed to the epilation process.
For optimal epilating results, the hairs should not be longer than
,
10 millimetres (Fig. )
To epilate longer hairs: (Fig. )
,
- shorten the hairs to a maximum length of 10mm with a trimmer. In
this case, you can start to epilate right away.
- shave the hairs completely. In this case you can start to epilate after a
few days (the hairs must be at least 0.5mm long).
Your skin may become a little red and irritated the first few times
,
you use the epilator. This phenomenon is absolutely normal
and quickly disappears. As you use the appliance more often, your
skin gets used to epilation, skin irritation decreases and
regrowth becomes thinner and softer. If the irritation has not
disappeared within three days, we advise you to consult a doctor.
We advise you to epilate before you go to bed at night, as
,
this allows any skin irritation that may develop to diminish
overnight.
corded use
Do not run the appliance from the mains when the battery is fully
charged.
1 To run the appliance from the mains, switch off the appliance and
connect it to the mains. Wait a few seconds before you switch on
the appliance.
Epilating with the leg skin cooler
Make sure your skin is clean, entirely dry and free from grease. Do not
use any cream before you start to epilate.
4203.000.3758.1 indd 9
EnglisH
9
23-10-2006 10:04:03