Philips ICE PREMIUM HP6503 Bedienungsanleitung Seite 13

 Clean all accessible parts, including the bottom of the epilating head
and the epilating discs, with the brush (Fig. 18).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 19).
Never try to detach the epilating discs from the epilating head.
6 Reattach the massaging element to the epilating head. Then place
the epilating head on the appliance and press it until it snaps home
('click') (Fig. 0).
The epilating head only fits onto the appliance in one way.
cleaning the shaving head
Clean the shaving head after every use.
1 Make sure the appliance is switched off and unplugged.
 Remove the shaving head.
 Pull the cutter unit out of the shaving head. (Fig. 1)
 Brush the hairs off the cutter unit and the shaving head. Make sure
that you also brush away any hairs that have collected under the
trimmers (Fig. ).
5 You can also rinse the cutter unit and the rest of the shaving head
(not the appliance!) under the tap (Fig. ).
6 Put the cutter unit back into the shaving head and snap the shaving
head back onto the appliance ('click') (Fig. ).
Do not exert pressure on the shaving foil to avoid damage.
7 Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the shaving unit twice a year.
storage
1 Put the protective cap on the shaving head ('click'). (Fig. 5)
 Store the appliance and the accessories in the pouch.
 You can also store the appliance in the stand (Fig. ).
4203.000.3758.1 indd 13
EnglisH
1
23-10-2006 10:04:04