Philips ICE PREMIUM HP6503 Bedienungsanleitung Seite 17

Problem
The skin cooler
is not cold
enough.
The pivoting
cooling head of
the leg skin
cooler does
not move.
It is not
possible to
remove the
epilating head.
4203.000.3758.1 indd 17
Possible cause Solution
You have applied Do not use any pressure when
too much moving the appliance over skin
pressure to the
appliance
You did not Put the skin cooler without the
freeze the skin insulating sleeve in the freezer or
cooler long freezing compartment (***) for at
enough. least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
You did not put Put the skin cooler without the
the skin cooler in insulating sleeve in the freezer or
the freezer or freezing compartment (***) for at
freezing least 4 hours. Do not store the
compartment. skin cooler in the refrigerator.
The skin cooler Make sure the skin cooler is
did not touch always in proper contact with
the skin. your skin during epilation.
The pivoting Pass the skin cooler over your leg
cooling head is a few times to make it pivot again.
frozen. Always make sure the outside of
the skin cooler is completely dry
before you freeze it.
You did not Press the release button and
move the move the epilating head in the
epilating head in direction of the arrow (fig. 14) to
the right remove it.
direction.
EnglisH
17
23-10-2006 10:04:06