ADURO 5.1 Bedienungsanleitung Seite 29

Congratulations on your new Aduro fireplace insert!
To get the best possible experience and benefit from your new Aduro fireplace insert, it is important that you
read the user manual thoroughly before you install the stove and start using it. Errors or incorrect settings
can cause hazardous conditions and/or poor operation.
For further information, please go to www.adurofire.com.
Extended product warranty - free online registry
You have the opportunity to extend the warranty on your fireplace insert from the statutory right of complaint
to an extended warranty of five years. All you need to do is register the stove at
www.adurofire.com/warranty/. The deadline for registering is five months from the date of purchase.
Production number
The stove has a production number on the rating plate on the back of the stove and the number is stamped
inside at the bottom of the door. For most of our stoves, the production number is also stamped on the front
page of the quick guide that is enclosed with the stove. For the purposes of the guarantee and for other
enquiries, it is important that you are able to quote this number.
HOW TO SUCCEED WITH YOUR NEW ADURO STOVE
Aduro's Customer Service Center
In
succeed with your new Aduro stove. Here you will have direct access to
interesting content about maintenance of your stove as well as support
related information.
1.1 Compliance
The stove complies with the European Directive Ecodesign 2022, the EN13240 European standard as well
as the NS3058 Norwegian standard and is thereby approved for installation and use in Europe. At the same
time, the manufacturing process is subject to external quality control. DoC (Declaration of Conformity) can be
downloaded at www.adurofire.com/download/.
1.2 Transportation
When taking your stove home, please ensure that it travels in an upright position. If you wish to lay it flat, it is
important that you remove all loose parts from the combustion chamber (cast iron grate, baffle plates, and
insulation tiles) and remove the ashpan. Otherwise, you can leave the insulation tiles and the cast iron grate
in the combustion chamber and then fill it up with surplus packaging to secure the loose parts.
you will find tips and tricks on how to
1. General
EN
29