patura 303660 Montageanleitung Seite 44

Installation Instructions
9.
Push the two-part support tubes
locking unit point inwards. The support folding segment base part (thicker tube)
to the brackets of the folding segments, the support folding segment insertion part (thinner tube)
corner post. Make sure that there is also a small gap here during assembly.
15 and 16 for the folding segments into each other. During assembly, make sure that the
16x hexagon head screw M12 x 65
15
16x nut self-locking M12
Locking bolts must face inwards
pointing at each other!
15
15 with the locking mechanism is attached
16
16
16
to the latches of the