DESCRIPTION OF TERMINAL BOARD
Name
V+ BUS
Power supply positive *
V-
Power supply negative
A
RS-485 data bus - A
B
RS-485 data bus - B
I1
Input connection
V+ AUX
Auxiliary power supply positive
Programmable output connection
TC (OUT)
(OC output, MAX 100 mA)
ALARM
ADDRESSING THE DEVICE ON THE BUS
Like any other device connected to the RS-485 bus, VEDO5TPR must
respond to a single address that can be configured from the display.
1. Access the settings menu via
2. Type in the installer code (default=001961) and confirm
3. Follow the path "Alarm options -> Configuration -> Device ID"
4. Type in the identification number of the device on the bus
SETTING THE SPEED
5. Access the settings menu via
6. Type in the installer code (default=001961) and confirm
7. Follow the path "Alarm options -> Configuration -> RS-485 bus speed"
8. Select the desired speed. It is important to make sure that the value
is the same as in the Safe Manager configuration software (default
38400)
Function
11