Functions - Rollei Mark IIs Anleitung

Functions

1. Power value:
M: In the manual mode the
power can be set from 1 .0 ~ 9 .0 .
The minimum power output is
1 .0 and the maximum one is 9 .0 .
Briefly press the control dial until the flash output is highlighted . To change
0 .1 f each, turn the control dial . For large adjustments, press and hold the
control dial for about 2 seconds . Turn the control dial to adjust the flash
output in 1 f increments .
TTL: In the TTL automatic mode the power can be adjusted from -3 .0 ~ +
3 .0 . The minium exposure compensation value is -3 .0 while the maximum
value is +3 .0 . The values can be changed in increments of 0 .3 .
3
Sony
2
5
31
1
8
4