Preparation; Inserting The Batteries; Functions - Rollei Profi Funk-Sender 2,4 GHz Gebrauchsanweisung

Preparation

Inserting the batteries

Open the battery compartment and install two AA
batteries according to the positive and negative
direction shown in the battery compartment . After-
wards close the battery compartment again .
• If you don't use the product for a long time,
please remove the batteries .
• If the batteries need to be replaced, please
always replace both of them together .

Functions

Install the trigger to the camera
1 . Open the rotary lock by sliding it to the left side .
2 . Insert the trigger into the camera's hot shoe
completely .
3 . Then lock the rotary lock again by sliding it to
the right side . Make sure that the trigger is well
positioned on the camera .
41