Rollei Mark IIs Anleitung Seite 37

Functions
10. Speed "Nor"/"Boost"
The newer firmwares of the Pro Transmitter Mark II can be set "Wireless
Speed" between "NOR" and "BOOST" . Briefly press the control wheel to
select the setting and choose between "NOR" and "BOOST" by scrolling
the control wheel . Confirm the setting by briefly pressing the operating
wheel or function key 3 .
Note: Our Rollei flashes can be operated via the "NOR" setting as well as
the "BOOST" setting . The setting depends on the firmware used or must
be adjusted on the flash .
11. Power
Here you set the power output of the radio signal . You can select the
power level between MIN (minimum: 18 dBm), NOR (medium: 20 dBm)
and MAX (maximum: 22 dBm) . Use a higher power level the further away
the radio transmitter and the flash are from each other .
37