Parts Diagram - Costway TQ10020DE Handbuch

Problem Possible Cause
Vehicle is Driving conditions are
sluggish too stressful
Intermittent Loose wire or
vehicle connectors
operation
Motor or electrical
switch damage
When the Loose wire or
accelerator is connectors
pressed, the
vehicle won't
run without a
"Dead Spot" on motor
push.
Motor gear box Broken gears
makes a loud
grinding or
clacking noise
Charger get This is normal and
warm during should not be concern.
use.
Battery makes Some noise and
gurgling or swelling is normal and
sizzling noise should not be a
while charging. concern.
22
Solution
Use only on a generally lever ground.
Check all wire around the motor and all
connectors to make sure they are tight.
Contact your Service Center for diagnosis
and repair.
Check all wire around the motor and all
connectors to make sure they are tight.
Contact your Service Center for diagnosis
and repair.
Contact your Service Center for diagnosis
and repair.
No action required.
No action required. If the battery does not
make noise while charging. It does not
mean it isn't accepting the charging.

Parts Diagram

No. Part Quantity
1.Front Wheel Axle
2.Front Wheel
3.Front Decoration Parts
4.Rear Drive Assembly
5.Motor cover
6.Motor cover Decorations
7.Rear Wheel
8.Rear axle
9.Plastic part under body
No. Part Quantity
x1 10.Rear body cover
x1 11.Main body
x2 12.Rear Decoration Parts
x2 13.Seat
x2 14.Handlebar
x2 15 Front Fork
x2 16.Windshield
x1 17.Head Part
x1
EN
x1
x1
x2
x1
x1
x1
x1
x1
23