Vertical Steam Ironing; Maintenance And Cleaning - Zelmer ZIS5400 Aqua Steam Benutzerhandbuch

PL EN
MARKING MATERIAL, FOR EXAMPLE
• (1 dot) Acetate, elastane, polyamide, polypropylene
• • (2 dots) Cupro, polyester, silk, triacetate, viscose, wool
••• (3 dots) / MAX Cotton / Linen

VERTICAL STEAM IRONING

This feature allows you to smooth out creases in garments or drapery in a similar manner to a garment
steamer. The high steam pressure of the Steam Station can provide bursts of steam while holding the iron
vertically. For best results, utilise on delicate or light fabrics. Only direct steam at hanging garments in a safe
area and ensure you always refer to gar- ment manufacturer recommendations.
WARNING: Do NOT direct the steam onto a garment that is being worn or at any person.

MAINTENANCE AND CLEANING

Iron lock
The easy carry locker attached to the base unit can be used to transport the steam Station with ease. To
do so, lift it in an upward motion until it clicks into position. Before using the Steam Station, the easy carry
handle must be locked back into position against the base unit; press and hold the handle release button
and carefully lower it back to place.
Cleaning
Turn off the Steam Station and unplug at the power outlet. Empty the water tank.
Regularly clean the ceramic soleplate with a damp, non-metallic washing pad. Wipe the exterior of the
Steam Station with a soft cloth.
Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station.
Descaling process
Proceed as follows:
1. Please prepare a water container.
2. Make sure that the plug of the product has been unplugged.
3. Fill the water tank to the maximum water level (MAX). Note: Do not pour vinegar or other descaling
agents into the water tank.
4. Insert the pump steam station plug into the socket, and the steam control knob has been adjusted to the
first point, wait for the heating indicator light to go out.
5. Hold the iron on top of the water container, press and hold the steam button until no scale is flushed out
from the bottom of the iron.
6. Turn the steam control knob back to the third point, until there is no water and steam rus- hing out from
the bottom of the iron.
7. Unplug the power plug of the iron, and move the iron gently on a cloth to remove the resi- dual water
stains on the soleplate.
8. Pour out the remaining water in the water tank.
9. Let the iron cool down and store it.
12