Installation Menu - ECG 32FSL231 Bedienungsanleitung

Connection speed
test
Advanced Settings
Network standby
mode
Note: For more information on the options for this offer, see Connecting.

Installation menu

Automatic program
search (Retuning)
Manual program
search
Scanning network
channels
Tuning analogue
reception
Setting up satellite
reception
Installation Settings
(Optional)
Home Transponder
Settings (*)
Delete service list
Select an active
network
Signal information
First time
installation
Start a speed test to check the connection bandwidth. When finished, the result
will appear on the screen.
Change the IP and DNS configuration on your TV.
You can enable or disable this feature by setting it to On or Off.
Displays the auto-tuning options.
Ground: Searches and stores DVB antenna stations.
Wired: Searches and stores DVB cable stations.
Analog: Searches for and stores analogue stations.
Satellite: Searches for and stores satellite stations.
This option is used for direct program tuning.
Searches for linked channels in the broadcast system.
Ground: He's looking for terrestrial channels.
Wired: He's looking for channels on the cable network.
Satellite: It's looking for satellite network channels.
You can use this setting to tune the analog channels. This feature is not available if
you have no analog channels stored or if the channel you are currently watching is
not an analog channel.
Displays the settings.
List of satellites: Displays the available satellites. You can Add, Delete satellites or
Edit satellite settings in the list.
Antenna installation: You can change the satellite dish settings and/or start a new
satellite scan.
Displays the installation settings menu.
Standby Search mode (*): While in standby mode, the TV will search for new or
missing channels. All new broadcasts found will be displayed.
Dynamic channel update (*): If this option is set to Enabled, changes to the
broadcast, such as frequency, channel name, subtitle language, etc., will be applied
automatically during viewing.
* Availability depends on the model.
Use this menu to edit the main and backup parameters of the home transponder,
including the PID of the relevant M7 operator used to download the channel list.
Set your preferences and press the Green button to save your settings. Then start
the M7 operator installation using the Auto Channel Scan > Satellitemenu.
* This option will only be available if the M7 operator is installed.
Use this function to delete stored channels. This setting is only visible if the Country
menu is set to Denmark, Sweden, Norway or Finland.
This setting allows you to choose whether broadcasts within the selected network
should be listed in the channel list. This feature is only available for the country
selection Norway.
You can use this menu item to monitor signal related information such as signal
level/quality, network name, etc. for available frequencies.
Clears all saved channels and settings and restores the TV to factory settings.
21