Remote Control; Input Selection - ECG 32FSL231 Bedienungsanleitung

To change the volume: Press the control button to display the function menu and then press the button
to move the focus to Volume + or Volume -. Hold the button for 2 seconds to activate the selected option.
The colour of the option icon will change when activated. Then press the button to increase or decrease the
volume.
To change channels: Press the control button to display the function menu and then press the button to move
the focus to Program + or Program -. Hold the button for 2 seconds to activate the selected option. The colour
of the option icon will change when activated. Then press the button to switch to the next or previous channel
in the channel list.
To change the source: Press the control button to display the function menu and then press the button to
move the focus to Source. Hold the button for 2 seconds to activate this option. The colour of the option icon
will change when activated. Then press the button again to display the list of resources. Scroll through the
available resources by pressing the button. The TV will automatically switch to the highlighted source.
Note: The main OSD menu cannot be displayed via the control button.

Remote control

Press the Menu button on the remote control to display the main menu screen. Use the directional buttons
and the OKbutton to navigate and make settings. Press the BACK or Menu button to exit the screen menu.

Input selection

If you have connected all external devices to your TV, you can switch to different input sources. Press the
Source button on the remote control to select the source directly.
Changing channels and volume
Use the Volume +/- and Program +/- buttons on the remote control to adjust the volume and change the
channel.
Reset and power off using the standby button
Press and hold the Standby button to view the other actions for that button. Reset (Restart), Standby (Normal
Standby) and Shutdown (Forced Standby) options will be available. Highlight one and press OK to perform the
selected action. If there is a problem that prevents the TV from switching to standby mode correctly, you can
use the Power Off option to force the TV to switch to standby mode.
If your TV stops responding to commands and the action menu cannot be displayed, the TV will restart if you
hold the button down for approximately 5 seconds. This will end the process.
Using the TV Main Menu
When you press the Menu button, the main TV menu will appear on the screen. Use the directional buttons
on the remote control to navigate the menu. To select a function or expand a side menu, highlight the tab and
press the OKbutton. If you highlight one of the main menu options, a secondary menu may appear at the top
of the screen to speed up access. To use Quick Access, highlight your choice, press OK and use the Left/Right
directional buttons to set it. When you have finished, press the OK or BACK button to exit the menu.
You can also see location, weather, time and date information on the TV's main menu screen. Small green
icons indicate the current status of time, network and app sync. If these icons appear in green, it means that
the time information is updated, the network is connected and the synchronization is successfully completed.
Otherwise, the icons will be displayed in white.
Depending on the country selection made during the initial installation, you can view the TV's lifetime
information in hours by pressing the Menu button and then the Blue button. Due to the quality of our
products, TVs are subjected to rigorous testing before they are released to the market, so it is possible that this
value will not be zero when first installed.
Press the Exit button to close and exit the menu.
My TV
When the main menu is open, the My TV menu bar will be highlighted. The content of My TV can be
customised. Go to the TV menu, highlight Edit home page and press OK. The My TV menu switches to edit
10