Electrical Safety; Personal Safety - Kress KG806E Bedienungsanleitung

sparks which may ignite the
dust or fumes.
c) Keep children and
bystanders away while
operating a power tool.
Distractions can cause you
to lose control.

2. ELECTRICAL SAFETY

a) Power tool plugs must
match the outlet. Never
modify the plug in any
way. Do not use any
adapter plugs with
earthed (grounded)
power tools. Unmodified
plugs and matching outlets
will reduce risk of electric
10
shock.
b) Avoid body contact with
EN
earthed or grounded
surfaces, such as pipes,
radiators, ranges and
refrigerators. There is an
increased risk of electric
shock if your body is
earthed or grounded.
c) Do not expose power
tools to rain or wet
conditions. Water entering
a power tool will increase
the risk of electric shock.
d) Do not abuse the cord.
Never use the cord
for carrying, pulling or
unplugging the power
tool. Keep cord away from
heat, oil, sharp edges or
moving parts. Damaged or
entangled cords increase
the risk of electric shock.
e) When operating a power
tool outdoors, use an
extension cord suitable
for outdoor use. Use of a
cord suitable for outdoor
use reduces the risk of
electric shock.
f) If operating a power
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected supply.
Use of an RCD reduces the
risk of electric shock.

3. PERSONAL SAFETY

a) Stay alert, watch what
you are doing and use
common sense when
operating a power tool.
Do not use a power
tool while you are tired
or under the influence
of drugs, alcohol or
medication. A moment of
inattention while operating
power tools may result in
serious personal injury.
b) Use personal protective
equipment. Always
wear eye protection.
Protective equipment such
as dust mask, non-skid
safety shoes, hard hat, or
hearing protection used for
appropriate conditions will
reduce personal injuries.