How To Assemble The Unit And Fill The Medication Container - Omron MicroAIR - U22 Bedienungsanleitung

How to assemble the unit and fill the medication
container
When using the unit for the first time or after not using it for a long period of time, clean and disinfect
the medication container, mesh, mask adapter, mouthpiece and mask. Refer to page 15 for instruc-
tions.
1. Insert batteries or use the (optional) AC adapter, see page 8 and 9.
2. Remove the medication container from the main unit. To do so,
push on the release buttons on both sides. This will disengage
the latch mechanism.
3. Remove the mesh cap by
placing your thumb under the
rim, gently pushing up, tilt the
cap back until perpendicular
and lift straight up.
Hold the medication bottle as
illustrated.
Lift up the Mesh Cap
Do not touch the mesh!
by placing your thumb
under the rim.
10
Medication container
release Buttons
How to assemble the unit and fill the medication
4. Fill the medication container as illustrated.
The maximum capacity is 7 ml.
5. Install the mesh cap
Do not touch the mesh!
The mesh cap seals the
medication bottle.
Confirm if the cap is
securely installed.
6. Install the medication container on the main unit
11