Care And Maintenance - HQ Power VDLL6RL2 Bedienungsanleitung

4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
5. Operation
General Operation
1. Choose a suitable mounting location according to the safety instructions and the
general guidelines.
2. Make sure the module connections are inserted into the central controller.
3. Insert the plug from the included AC adapter into the power input of the modular
organ.
4. Insert the AC adapter into a suitable power socket.
5. Switch on the device with the on-off switch.
6. Set the microphone sensitivity with the music sensitivity dial; set the speed with
the speed dial. The modular organ will now react to ambient sounds through the
microphone.
7. Switch off the device with the on-off switch and disconnect from the mains after
use.
Changing the Modules
You can easily choose the lighting sequence of this light organ by interchanging the
modules:
1. Disconnect the light organ from the power supply.
2. Disconnect all module connections from the central controller.
3. Carefully slide each module from the central controller and slide them back onto
the controller in the desired order.
4. Reconnect each module to the central controller using the module connections.
5. Proceed as described under general operation from 3 to 7.
6.

Care and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning
•
Clean the external optics and the housing with a slightly moist, soft cloth. Do not
immerse the device in any liquid.
•
Always be sure to dry all parts completely before plugging the unit back in.
V. 02 – 19/01/2022
built-in microphone
music sensitivity dial
speed dial
VDLL6RL2
4
5
6
5
on-off switch
power input
module connections
©Velleman Group nv