Limiter - dB Technologies IA504R Bedienungsanleitung

English

LIMITER

Limiter Input channels
You can pass the Processing Channels through a compressor/limiter, for which you can set the threshold, ratio,
make up gain, and the attack, release and hold times. The output channels also have a limiter with the ratio pre-
set to ∞:1; the limiter is disabled in the 70/100V output configuration and when a preset is loaded into the output
section.
The Limiter is enabled with flat settings by default.
Limiter Processing channels
IA504R Cod. 420120398 REV. 1.0
41