Catalytic Oven Surfaces - NEFF E 1524 Gebrauchsanleitung

Catalytic oven
surfaces
Cleaning the catalytic
surfaces of the oven
Cleaning the oven floor,
the oven ceiling and the
side walls
66
The rear wall of the oven is coated with self-cleaning
enamel. The surface cleans itself while the oven is in
operation. Large splashes sometimes only disappear
after the oven has been used several times.
Never use oven cleaner on the back wall of the oven.
Should the enamel become slightly stained, this will
not affect its self-cleaning properties.
Use hot soapy water or a vinegar solution.
It is best to use oven cleaner if the oven is very dirty.
Only use oven cleaner in a cold oven.
Never use oven cleaner on the self-cleaning rear wall
of the oven.
Note:
Enamel is baked on at very high temperatures.
This can cause some slight colour variation. This is
normal and does not affect the function. Do not use
coarse scouring pads or strong cleaning agents to
remove such discolorations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
Anti-corrosion protection is guaranteed.