Siemens SIMATIC S7-1200 Originalbetriebsanleitung Seite 10

Electromagnetic Compatibility
The product is intended for operation in the Industrial EMC environment class.
Ensure that your automation system is installed in compliance with EMC requirements, as described in the
(
https://support.industry.siemens.com/cs/ww/en/view/109744173
NOTICE
Interference emission / Interference immunity
Operation of the product can cause radio interference in residential areas.
If higher EMI is expected at the place of use than is intended for the industrial area according to EN61000-6-2, additional
measures are required (e.g. ESD, overvoltage protection).
ATEX-/UKEX device intended for use in hazardous area
If the product is intended for use in a potentially explosive atmosphere (gas/air or gas/dust mixture), observe the special
documentation (
information in the
(e.g. ATEX zone, degree of protection, temperature class) is indicated on the product (in the declaration of conformity and
usually also on the nameplate).
NOTE
As a rule, country-specific requirements for the operator also apply when a product is used in a potentially explosive
atmosphere (e.g. Directive 1999/92/EC for the EU).
Cleaning
If you need to clean the product, use dry ESD cleaning cloths (observing the protective measures for ESD).
Requirement: All supply voltages present on the device are switched off. Observe the five safety rules for working in and on
electrical installations.
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer.
Recycling and disposal
For environmentally sustainable recycling and disposal of your electronic waste, contact a company certified for the disposal
of electronic waste. Dispose of the product in accordance with the applicable regulations in your country.
Accessories
You can find information on the approved accessories in the
(
https://support.industry.siemens.com/cs/ww/en/view/109744173
10
https://support.industry.siemens.com/cs/ww/en/view/109744173
documentation
)
for the product.
)
.
documentation
)
. The intended use
Compact Operating Instructions
A5E51784853-AC, 06/2023