How To Set The Time - RGMT LOCUST Bedienungsanleitung

* This watch MUST be worn for at least 8 (Eight)
hours each day to ensure it is fully wound. An
automatic watch will only wind when the watch
is on your wrist and your arm moves. Winding the
watch by the crown will put power on the spring
but not enough to allow the watch to function
fully. If your watch stops overnight or loses time
it means it is not being fully wound.

HOW TO SET THE TIME

1. Unscrew the crown and pull it out to position
[3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.
0
2
0
* Take a.m./p.m. into consideration when setting
the hour and minute hands to the desired time.
* Always be certain that your crown is SECURELY
SCREWED; this will prevent moisture from
entering in.
4
3
5