Cointra L5 Handbuch Seite 11

8. Turn the spray nozzle to the "on" position, turn your
water source on and adjust to the desired water
pattern on the shower head
9. There will be a series of audible clicks and the burner
will ignite. (Should the burner not ignite after 5
seconds, shut off and go to the "Troubleshooting"
section.)
10. After use, open the drain valve (ribbed cylindrical stem
next to the water input valve) to ensure draining of
water
11. Turn off your gas supply
WARNING: If the outside temperature is around or below
freezing (32 degrees F, 0 degrees C), ensure that the drain
valve is opened and water drained from the unit after each
use to avoid internal damage to the water regulator. You
will also need to unhook the outgoing water line to ensure
that any water in the heat exchanger is drained. Failure to
properly drain your unit will cause water damage which
may or may not be reparable. Please check the warranty
information
www.eccotemp.com/freeze
freezing issues.
found on
for more information on
our website at
9