Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

programming the digital control unit.
Support racks
The height of the racks can be freely adjusted to accommodate products of different heights. Proceed as
follows to modify the height:
-
Remove the rack;
-
Position the rack support guides in the desired position;
-
Place the rack back onto the support guides.
Wheel kit (optional on all models)
Instead of the standard legs, a wheel kit is available as an option. Four wheels are supplied: two with brakes
(front wheels) and two without brakes (rear wheels).
Proceed as follows to mount the wheels:
Lift the refrigerator while keeping it in an upright position. Do not tilt or lay it on its side.
Remove the bolts holding the legs and mount the wheels in their place, making sure that the wheels with the
brakes are mounted in the front of the appliance (door side).

2.5 Accessories included

The appliance comes standard equipped with the following accessories:
GA700 (all models): 3 pair of guides and 3 shelves;
GA1400 (all models): 6 pair of guides and 6 shelves.
2.6 Protection devices present on the appliance
The appliance is equipped with the following safety protection devices:
- Protective grille for the technical compartment fans which prevents the users from touching moving parts
during normal operation of the appliance.
3. Safety instructions
This section summarises the information concerning all the essential safety-related aspects. The individual
sections also contain important safety related information (with relative symbols), in order to prevent the
occurrence of hazards. Users must comply with the information given on the pictograms, nameplates and
wording on the appliance, taking care to ensure that they remain legible. Compliance with all the safety related
instructions guarantees optimum protection and performance of the appliance in complete safety and without
problems.
The instructions concerning workplace safety refer to the EU Directives in force at the time of manufacture of
the appliance. If the appliance is used in an industrial setting, during the entire period of use, the user must
check that the specified safety devices comply with the current regulations for this sector, and comply with the
new regulations. If the appliance is used outside the European Union, the local workplace health and safety
regulations in force in the location where the appliance is used must be respected.
In addition to the workplace health and safety requirements contained in this handbook, the specific
environmental protection regulation in force in the location where the appliance is used must also be
respected.
Carefully read this installation, operation and servicing handbook before installing and using the appliance.
It is strictly forbidden to remove, modify or deactivate
any safety /protection device on the appliance.
16

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ga700cbtGa1410ctn

Inhaltsverzeichnis