Operating Environment - Renkforce 2626526 Bedienungsanleitung

Operating Instructions
2.4 GHz Wireless Presenter and Laser Pointer
Item no: 2626526
1 Intended use
The product is a wireless presenter with laser pointer. Use the product as a pointing device during
presentations and to control sideshows. It is battery operated and works with a USB-A receiver that fits
into a magnetic slot when not in use.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
USB-A receiver (attached to product)
■
1x AAA battery
3 Latest product information
Download the latest product information at
low the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

5.3 Operating environment

■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Batteries
■
Correct polarity must be observed while inserting batteries.
■
The batteries should be removed from the device if it is not used for a long period of time to avoid
damage through leaking. Leaking or damaged batteries might cause acid burns when in contact with
skin, therefore use suitable protective gloves to handle corrupted batteries.
■
Batteries must be kept out of reach of children. Do not leave batteries lying around, as there is risk,
that children or pets swallow them.
■
Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-rechargeable
batteries. There is a risk of explosion!
5.6 Laser class 2
■
When operating the laser equipment, always make sure that the laser beam is directed so that no one
is in the projection area and that unintentionally reflected beams (e.g., from reflective objects) cannot
be directed into areas where people are present.
3
■
Laser warning signs in different languages
■
Operating instructions
www.conrad.com/downloads or scan the QR code shown. Fol-
■
Laser radiation can be dangerous if the laser beam or its reflection enters unprotected eyes. Before
using the product, familiarise yourself with the statutory regulations and instructions for operating this
type of laser device.
■
Never look into the laser beam or point it at people or animals. Laser radiation can seriously damage
your eyes.
■
If laser radiation enters your eyes, close your eyes immediately and move your head away from the
beam.
■
If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety im-
plications, such as working with machines, working from heights, or working close to high voltages.
Do not drive any vehicles until the irritation has completely subsided.
■
Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam
may strike people or animals.
■
Never open the device. Configuration or maintenance tasks must only be completed by a trained spe-
cialist who is familiar with the potential hazards. Improper maintenance work may result in dangerous
laser radiation.
■
The product is equipped with a class 2 laser. Laser signs in different languages are included in the
packaging. If the sign on the laser is not in your local language, attach the appropriate sign to the
laser.
LASER
2
Max. Output: <1 mW
650 nm
Wavelength: 630/670 nm
EN 60825-1: 2014
■
Caution: Using equipment or procedures other than those described in these instructions could lead
to exposure to dangerous radiation.
6 Product overview
2
1
5 6 7 8 9 10
Note:
The following information is applicable to Microsoft Power Point. Features and functions with other ap-
plications may differ.
Part Description
1 Laser beam
2
Volume buttons: +/-
3 Battery compartment (rear)
4 USB-A receiver compartment
5 Button press indicator
6 Press + hold: toggle through open programs
In presenter mode:
1x press to select / toggle through links on page
In presenter mode: 2x press to open selected link
7 1x press: next slide
Press + hold: enter presenter mode / exit presenter mode
8 Main power switch: ON/OFF
9 1x press: previous slide
Press + hold: enter blank screen / exit blank screen
10 Laser pointer activation button
7 Installing and replacing the battery
1. Remove the battery compartment cover.
2. Insert a battery matching the polarity shown inside.
3. Replace the battery compartment cover.
8 Connection
1. Insert the receiver into an available port on your computer.
2. Wait a few moments for your computer to download the necessary drivers and setup your new device.
à The product is now ready for use.
9 Operation
Preconditions:
a
The receiver is connected, and you are within wireless range.
1. Switch the main power switch ON.
2. Load your presentation software and open the file you will present.
3. Press and hold the "UP" button to enter presentation mode.
4. Press the "UP" or "DOWN" buttons to change slides.
5. Switch the main power switch OFF after use.
3
4
Keypress
alt+tab
tab
enter
up arrow
alt+F5 / esc
Down arrow