Electrical Operation; Gas Operation (Liquid Gas); Setting Of Cooling Compartment Temperature - Dometic RGE2100 Montage- Und Bedienungsanleitung

822 6100-94_EN_RGE2100_N1.qxp

5.5.2 Electrical operation

1
Switch on the appliance by turning the energy
selection switch (1) clockwise to position :

5.5.3 Gas operation (Liquid gas)

Prior to starting the refrigerator in gas
mode :
Open the gas cylinder valve.
1
1. Turn the rotary selector switch (1) to
position
2. Turn the temperature selector (2) clockwise
and push. Keep the controller button
depressed.
31.01.2012 10:20 Seite 15
Fig. 9
230V operation.
2
Fig. 10 Fig. 11
gas operation.
Refrigerator operation
2
3. Activate Piezo ignition (3) several times at
intervals 1-2 second.
4. Once the flame ignites, the pointer of galva-
nometer (4) begins moving into the green
range. Keep knob (2) depressed for
approx. 15 seconds and finally release it.
The refrigerator is operational.
5.5.4 Setting of cooling compartment
temperature
2
Fig. 14
Select the desired cooling compartment tem-
perature by turning the rotary knob (2) .
The scale starts with MIN position (small bar =
highest temperature) and climbs up to MAX
position (large bar = lowest temperature).
Note: The temperature levels do not relate to
absolute temperature values.
15
3 4
Fig. 12 Fig. 13
medium setting