Philips hq 4866 Bedienungsanleitung Seite 6

ENGLISH
8
C
1
2
C
C
C
C
1
2
3 Turn the wheel anticlockwise and remove
the retaining frame.
4 Remove and clean the shaving heads
(cutters and guards) one by one.
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
performance. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the short-bristled
side of the brush.
Brush carefully in the direction of the arrow.
6 Brush the guard.
If necessary, you can clean the shaving unit with a
degreasing liquid (e.g. alcohol). Remember to
lubricate the central point of the guards with a
drop of sewing machine oil after cleaning.
7 Reassemble the shaving unit: press the
wheel and turn it clockwise.
8 Place the shaving unit back onto the
shaver.