Technical Data - S+S REGELTECHNIK THERMASGARD RSTF Bedienungs- Und Montageanleitung

G
®
THERMASGARD
Resistance thermometer THERMASGARD
attachment for installation on vertically or horizontally installed in-wall flush boxes, with predetermined breaking point for on-wall cable entry,
specifically used for temperature detection in larger rooms. The room radiation temperature sensor RSTF determines the effective portion of active
radiation or the effective radiant heat at the measured location. Due to the measuring method employed by the dark radiation temperature sensor,
an excellent and room- representative measuring result is achieved. In addition there is an independent passive output available to determinate the
reference temperature.

TECHNICAL DATA

Measuring range:
Sensors ⁄ output:
Connection type:
Testing current:
Insulating resistance:
Process connection:
Housing:
Dimensions:
Electrical connection:
Humidity:
Protection class:
Protection type:
1x two-wire connection
standard
1
2
Rx
3
4
Rx
®
THERMASGARD RSTF
Type ⁄ WG03
RSTF
R S T F P T1 0 0
R S T F P T1 0 0 0
R S T F N I 1 0 0 0
R S T F N I T K
R S T F LM 2 3 5 Z
R S T F N T C 1 , 8 K
R S T F N T C 1 0K
R S T F N T C 2 0K
Extra charge:
RSTF
® RSTF with passive output in an elegant housing made of plastic, with snap-on lid, base with 4-hole
–30...+75 °C
see table, passive (optional also with two sensors)
2-wire connection (4-wire connection on PT100 ,
optional on other sensors)
< 0.6 mA (Pt1000)
< 1.0 mA (Pt100)
< 0.3 mA (Ni1000, Ni1000 TK5000)
< 2.0 mW (NTC xx)
400 μA...5 mA (LM235Z)
≥ 100 MΩ, at +20 °C (500 V DC)
by screws
plastic, material ABS
Housing: pure white (similar to RAL 9010), Semi-globe: black
85 x 85 x 27 (40) mm (Baldur 1)
0.14 - 1.5 mm², via terminal screws
< 95 % r. H.
III (according to EN 60 730)
IP 30 (according to EN 60 529)
1x two-wire connection
LM 235 Z (KP 10)
+
1
–
2
LM235Z
+
3
–
4
LM235Z
Room radiation temperature sensors
Sensor ⁄ Output
Pt100 (according to DIN EN 60 751, class B)
Pt1000 (according to DIN EN 60 751, class B)
Ni1000 (according to DIN EN 43 760, class B, TCR = 6180 ppm ⁄ K)
Ni1000 TK5000 (TCR = 5000 ppm ⁄ K), LG - Ni1000
LM235Z (TCR = 10 mV ⁄ K; 2.73 V at O °C), KP10
NTC 1.8 K
NTC 10K
NTC 20K
two or other sensors optional
1x four-wire connection
(optional)
1
1
Rx
2
2
3
4
Rx
Rev. 2020 - V24
1x four-wire connection
(optional)
1
1
LM235Z
2
2
+
3
–
4
LM235Z
Item No.
IP 30
1101-40C0-1003-000
1101-40C0-5001-000
1101-40C0-9001-000
1101-40C1-0001-000
1101-40C2-1001-000
1101-40C1-2001-000
1101-40C1-5001-000
1101-40C1-6001-000
on request
+
–