Introduction; Explanation Of Symbols; Intended Use - TOOLCRAFT Digimicro LAB 5.0 Bedienungsanleitung

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact:
www.conrad.com/contact

2. Explanation of Symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric
shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.

3. Intended Use

This product is a standalone device powered by rechargeable battery. It can output a magnified image through the
built in LCD display, television or a computer monitor. It is suitable for examining solid objects such as coins, stamps,
rocks, insects, plants, textiles, circuit boards, etc. Dimmable LED lights provide brightness, and the bundled software
allow the user to calibrate the microscope, and measure captured images.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can result in short circuits,
fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this
product available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
26