Before Startup; Steam Ironing - Maestro MR308C Bedienungsanleitung

BEFORE STARTUP

Before the first use remove a protective film (at presence) from an iron sole.
Make sure that all the parts of appliance don't have damages.
Please note! When using the iron for the first time, you may notice a slight emission of
smoke and hear some sounds made by the expanding plastics. This is quite normal and it
stops after a short time. We also recommend passing the iron over an ordinary cloth before
using it for the first time.
Soft the laundry to be ironed according to the international symbols on the garment label,
or if this is missing, according to the type of fabric.
GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION
Table 1
Signs on labels
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat up than to cool down) and
eliminates the risk of scorching the fabric.
- Filling the reservoir
Please note! Do not use chemical additive, scented substances or decalcifiers.
- Check that the plug is disconnected from the socket.
- Move the steam selector (3/Picture 1) to "0" (Picture 2.1).
- Open the lid (2/Picture 1)
- Raise the tip of the iron to help the water enter the opening without overflowing.
- Slowly pour the water into the water tank Picture 2.2 using the special measure and
taking care not to go over the maximum level indicated by "MAX" on the reservoir
- Close the lid (2/Picture 1).
SELECTING THE TEMPERATURE Picture 2.3
- Put the iron in a vertical position.
- Put the plug in the socket.
Operation
Type of fabric Thermostat positions
Synthetic
Low temperature
Silk - wool
Medium temperature
Cotton - linen
High temperature
Fabric not to be ironed

STEAM IRONING

5
●
●●
●●●
EN